When Is The Right Time To Call Someone To Repair Your Air Conditioning in San Jose

You know your air conditioning system, and sometimes you get that feeling that something is not quite right. If you have started to see a change in the overall performance of your air conditioning unit, you may want to call someone to repair your air conditioning in San Jose. If you are unsure of when to contact a specialist, consider looking for these signs.

Signs to watch for:

When you make a series of adjustments to the settings on your air conditioning system, you may not feel a change in any of the temperature. The system may not be providing a cool air, and if this is the case, then you should contact your HVAC specialist. This problem could indicate that your thermostat may be going bad. Under no circumstances should you AC leak large quantities of water. If you should notice any leaks, you need to schedule a diagnostic with a technician. You may have a clog in the drain line that needs to be removed. Any time you hear unusual noises from your HVAC system, you need to have the system looked at by a technician. A bad part or failing component can be the culprit for the unusual noises.

Importance of getting an appointment scheduled sooner rather than later

You don’t want to find yourself helpless in the middle of an extremely uncomfortable scenario where temperatures are at their highest and you don’t have any air. You also don’t want to find yourself having to replace the entire unit altogether just because you delayed services. It’s important to schedule the much-needed repair sooner rather than later. The average costs for a minor repair is just under $200, according to research. Homeowners can expect to pay up to $4,000 for replacing the entire unit. You want to minimize costs by getting an appointment scheduled as soon as you suspect that something is wrong to avoid having to replace the entire unit.

What will a technician do when scheduled for an appointment?

When a technician appointment is scheduled, a diagnostic will likely be performed to determine the root cause of the performance issue. They will check the air filter, and verify whether or not it should be changed. The drain lines will likely be checked for clogs. The evaporator coils will be checked to see if they are frozen or not. They will inspect the system to identify the root cause of leaks. Batteries in the thermostat may need to be checked to verify that the thermostat isn’t going bad. A problem with the circuit breaker could result from an A/C unit overheating, so a technician may need to check that as well.

Leaks, strange noises, and freezing are all indications that something may be awry with the air conditioning unit. Getting a service appointment scheduled is essential in protecting the service life of your unit. Contact us today to schedule an appointment.

Common Questions People Have About Their Air Conditioner in San Jose

In San Jose, air conditioning units play a vital role in keeping residents safe and comfortable as the temperatures warm up. For this reason, you should always arrange for a pre-season inspection and tune up to make sure that it is ready for the height of the summer. Unfortunately, air conditioning problems can still arise even when you practice proper maintenance. As you prepare for the rising temps, check out these common questions that people tend to have about their air conditioner this time of year.

Why is the Air Conditioner Blowing Warm Air?

Your air conditioning unit is designed to take warm air and make it cold before it blows through the vents. However, a malfunctioning unit can fail to cool the air properly before it comes out. Often, this is due to a clogged filter, and this issue is quickly resolved by making sure to change the filters on a regular schedule. For most units, this needs to be done every one to three months. You may also find warm air blowing out of the vents if the unit has a refrigerant leak, so make sure to arrange for professional repairs if changing the filter doesn’t do the trick.

Why Does the HVAC Unit Keep Turning Off and On?

Rapid cycling is another issue that sometimes occurs during the summer. An air conditioning unit that is failing to cool the air may naturally cause the system to try to turn on over and over again in an attempt to reach the set temperature. There could also be a problem with the thermostat or its placement. In some cases, an improperly sized or installed unit causes rapid cycling because the system is unable to keep up with the demand required to properly cool the building.

Does My A/C System Need Replacement?

The average life of an HVAC unit is 10 to 15 years, and there does eventually come a point when repairs are no longer possible. Typically, your air conditioning system requires replacement when it begins to experience frequent breakdowns or if it becomes inefficient at cooling your property. People with older units often find that a replacement makes financial sense because it reduces the cost of their utility bills and eliminates the constant need to pay for repairs. If a replacement is necessary, you should expect for your HVAC technician to explain why and provide you with your best options for making the installation affordable.

Is your residential or commercial air conditioning unit showing signs of trouble? Call us now at 408-295-2182

What To Look For In a New Construction Contractor

It’s a beautiful day and as you settle into your morning routine at the office, sipping on your second cup of java your office line rings. A pipe has burst in the lobby restroom and water is everywhere. The company’s largest client is coming by for a lunch presentation and time is of the essence. If you’re prepared, you’ll have your construction contractor on speed dial. If not, you’re going to have to move quickly to find a reliable and reputable firm that can handle the situation stat. Don’t put yourself or your business in that situation.

Identifying a new construction contractor doesn’t need to be daunting. Hopefully, you’ve not waited for a plumbing or HVAC crisis to look for a new construction company to work with. If you’re a large corporation or small to medium sized business, the same evaluation strategy applies.

Key Qualities to Look for in a New Construction Contractor

Company history. The length of time a company has been in business says a lot. There are construction contractors that come and go. Look for a business that has a solid history. Factor in how many years they’ve been in business and if they’re family owned, even better. A construction contracting company that has generations of experts behind it is a find.
Reputation. If the company has been in business for years, they must be doing something right. Take a look at their reputation. What are customers saying about their work? Do they get the job done in a professional manner? Are they dependable? If they’re keeping their clients happy and expanding their business, give them another positive check on your evaluation list.
Expertise. Your construction contractor should be well-versed in the basic mechanics of everything from piping, gas fittings, new and old construction, to HVAC and more. They should be able to handle it all. You want to use an expert firm. One that keeps up with proper licensing and training for all crew members and leads their industry when it comes to cutting edge technology.
Safety. Safety first should go without saying, but this needs to be taken into consideration. You want a new construction contractor that put this as a top responsibility.

Ready you ready to make your move? We can help, call us today at (408) 295-2182

Why You Should Only Call a Locally Owned HVAC Company

There are many reasons to turn to a locally owned HVAC company. You want to be sure that you always hire a company that you can rely on when it comes to something like your cooling needs. When the temperature heats up outside, you want to be able to stay cool inside of your property.

Choose a Locally Owned Business Because:
. You can be sure that they have a good reputation
. You are putting money back into your community
. They will be able to help you quickly

You Can Enjoy the Benefits of Going with a Locally Owned Company

By going with a local business, you can find out what type of company you will be hiring before you choose them. Ask around to find out if the company has a good reputation. You should be able to discover if the company is licensed, insured, experienced, and how there customer service is. By working with a locally owned company, you can feel like you are going to be doing business with one of your neighbors instead of a big company where you are just another customer.

When you do business with a locally owned HVAC company, you can be confident that you are putting money back into your community. The owner will be happy to work with you. You can be happy that every time they spend your money around town, it will go to the growth of your area. If you want to help your community, always choose to support a locally owned business when you can.

A locally owned business will be able to help you in a speedy amount of time. You can count on them to come out to your property when you need them to. Your local HVAC company will be nearby and ready to assist you with emergency repair or replacement services any time that you need them to.

If you are interested in HVAC services, we can help. As a locally owned HVAC company, we will do our best to make certain that you are a happy customer. We will treat you like a neighbor instead of just another person that we do business with us. Call us now at 408-295-2182 for fast and efficient services that you can always rely on.

How to Check the License of Contractors in California

Anytime you are considering having work done at your home or office, it’s important to make sure the contractor you choose is fully licensed. It’s easy to assume a contractor would not operate without a valid license; however, you might be surprised at how often contractors continue to work without the proper licensing. Fortunately, checking for a license is incredibly simple, and it can be done with just a few pieces of information.
To check for a current contractor’s license in California, simply visit the Contractors State License Board (CSLB) website. Once there, you’ll need to enter the business name, individual’s name, or license number to be shown a list of companies matching the information given. For each company listed, it will also show the contractor’s name, license number, city of business, and current status of their license.
Once you have found the contractor you’re looking for, click on the license number listed. This will give you further information on the contractor such as:

  • Business address
  • Entity type
  • Date of license issue and expiration
  • Bonding information
  • Details on their insurance

Why Checking a Contractor’s License is Important

While this may seem like a lot of effort, hiring a contractor who does not have an active license can cause serious problems for you down the road. If your contractor is unlicensed, you could personally be stuck with any repair costs due to issues with the work. It’s also in your best interest to verify that the contractor is both bonded and properly insured. Being bonded basically ensures the contractor’s customers are covered financially if the contractor’s work causes damage or is otherwise done improperly. Verifying that the contractor carries insurance that is adequate for covering your project is also a smart move. Of course, a reliable contractor will have all of this information handy for customers from the start, but it never hurts to verify since this can impact you greatly if they falsify any of the information.

Selecting the right contractor for your job can seem stressful, but it is worth researching to ensure everything is done properly. For a business you know you can trust, O.C. McDonald is here to help! Give us a call today at 408-295-2182 to get started on your next project.

What is Fabricated Sheet Metal Used For in HVAC?

Fabricated sheet metal is commonly used in the ductwork of HVAC systems. Traditional ductwork is installed in commercial and industrial buildings for the heating and cooling systems. Sometimes, however, the regular metal ductwork must be routed in odd ways, due to various obstacles in the path. Longer piping would be added to get the metal fittings and tubes installed to go around all those barriers.

Due to the odd routing of all the ductwork, the HVAC system would ultimately have to run harder to heat or cool the building properly, because it has to run the heat through a long set of pipes. For an HVAC unit to run efficiently, fabricated sheet metal would be utilized to run around the obstacles for a more direct path from the heating/cooling system to the air vents.

Fabricated sheet metal enables one to bend, and turn the metal to the desired shape, so it will fit much like a jigsaw puzzle in the areas you want them to. This would eliminate the need for all those extra pipes and fittings that only succeed in using more energy to run the HVAC system. Also, by using more customizable ductwork, like the sheet metal, you’re prolonging the life of your unit, because it’s not working harder to heat or cool your space.

How Does Fabricated Sheet Metal Have Advantage Over Regular HVAC Ductwork?

We’ve already discussed the fact that sheet metal is more customizable when it comes to installing the ductwork for a building. They work perfectly for fitting into what seems like an impossible spot for regular pipes. The places that fabricated sheet metal fittings work best are:

  • Around Sharp corners
  • Behind pipes
  • In tight, cramped spaces

When using only traditional HVAC ducts, one would have to install an intricate system of pipes to avoid the places where you can’t fit regular ductwork. Now, it’s much easier when you can get someone to fabricate ducts using sheet metal. The pipings and fitting would be cut and shaped precisely to your specifications.

Installing the fabricated pieces of ductwork helps the HVAC unit run in the most efficient way possible for any commercial or industrial building. Finding a shop that can fabricate sheet metal accurately isn’t always easy. If you’re looking to get some ductwork customized for your building or space, give us a call at 408-295-2182. Our skilled professionals can fabricate your ductwork for whatever specifications you need, and we can also install them if you want.

How Much Should It Typically Cost To Repair an AC Unit?

Average repair costs for an AC unit would depend on the type of repair needed, and how complicated it may be to perform. Repairs can range from minor, quick fixes, to more difficult, time-consuming ones so that costs will vary.

For the smaller, quick fixes, you could expect it to cost anywhere from a few bucks to $100. This would include jobs like replacing simple parts or even regular maintenance on the unit itself. For repairing leaks, it could run around $200- $1,000 depending on what needs to be done to stop the leak and get the unit running smoothly again.

If you’re replacing refrigerant, it could cost you probably in the $200-$400 range. The cost would vary with the age and type of unit that’s being fixed. Older AC appliances require more work to fix. Sometimes the parts for them are more expensive and can be much harder to find.

A clogged condenser line can typically cost you around $100-$200, or less if it ends up being a simple and quick job for the repairman to do. It isn’t too difficult to repair, but some units could take more labor than others to fix.

Average costs for Complex Repair Jobs

For more complex repair jobs, the prices can get on the higher side quickly, due to parts being much more expensive to get, and the time it takes to perform the part replacement. Typical price ranges for some of the AC unit parts without the cost of labor:

  • Thermostat- $100-$300
  • Condensing Fan Motor- $300-$500
  • Condenser- $800-$1,000 and up

Of course, AC unit repair technicians will charge for labor, which could be anywhere from $50 an hour to $150 an hour. Every repairman charges differently, so you need to check before hiring one. Also, the cost of the parts is just a general price range. You may find some that are cheaper or some that are more expensive, depending on who you end up going with.

To eliminate the need for some of these expensive repair costs, you will need to keep your AC unit adequately maintained, so it stays running smoothly. The need for repairs will diminish significantly with annual maintenance with only a few repair fixes along the way. As your AC unit gets older, parts will start to break down, and they will need replacing. A new appliance may be the better investment in the long run if you’re not keen on spending the money just to replace some parts. Call us at 408-295-2182. We can help you with any questions you may have.

Situation Where You Would Need Emergency Plumbing

There are a few different situations where emergency plumbing services would be needed. But probably the most popular would be when you have a flood on your hands, and you don’t know where it’s coming from. A flood is not a DIY project because you need to get the problem fixed pronto before any lasting damage occurs. The best option, when you need plumbing services in a hurry, is to call a professional plumbing contractor to resolve this problem quickly, and with fewer hassles.

When a flood occurs in your home, it’s usually because of a leak, that’s been hidden somewhere inside your house. The leak just got worse, and now water is seeping through a wall, or floor, and causing a flood to happen, and a mess to take over. The key is finding exactly where that leak is and getting it fixed right away.

This is where emergency plumbing services come in handy. Getting someone out to your home in a flash, and getting the problem leak fixed will prevent damage to your walls, floors, and foundation. Damage can also be done to furniture and carpeting as well if they are located where the flooding happens to be.

Emergency Plumbing Services

When a job is urgent, a professional plumber will get out to you quickly, no matter what time of day it may be. They’ll perform a thorough job in deducing where the leak is coming from and they’ll come up a plan of action to resolve the problem in the best way possible.

Often, if the flood is in the basement, the culprit could be one of the following:

  • Leaking water heater
  • Leaking water softener
  • cracked or broken drain pipe

Once the plumber has pinpointed the issue, they can determine what repairs should be given to alleviate you of the flood. Whether it’s a small repair job, or if it involves replacing a pipe or the water heater; you’re in good hands with a licensed professional who is knowledgeable about these types of plumbing issues.

If a flood occurs in your home, don’t try to tackle it yourself. Contact someone who does this kind of thing for a living. Get the job done right and avoid the possible repairs you could’ve been faced with. If the situation gets out of hand, you could end up paying tons more than you should’ve if you simply went with a professional, to begin with. Call us at 408-295-2182 any time of the day or night. We’re here for you.

How to Choose Between Good and Bad Plumbers in San Jose

There are many good and bad plumbers working in San Jose, so it is important to spot the good ones. You want to pick out a professional company before you need assistance so that you can quickly call them in the case of an emergency. Do your homework and find the best choice for your unique needs. A good company will be able to handle all of your plumbing concerns quickly, safely, and for a reasonable price.

What to Look for in a Good Plumbing Company:

  • Licensed professionals
  • Insured business
  • Experience
  • Good reputation
  • Skilled professionals with great customer service

Compare Good and Bad Plumbers

A bad company may be run by people who are not licensed. You always want to go with a professional when it comes to something as important as your plumbing needs. If minor issues aren’t fixed properly, they can turn into large problems. Licensed professionals will have the skills and tools needed to do the job right the first time.

A bad plumbing choice will be a company that has no insurance. You want to have peace of mind that your home is going to be safe when you hire a company to handle your plumbing needs. Be sure to only hire a company that is insured.

Experience is something to look for too. While a bad plumbing company may not have a lot of experience, a good choice will have years of experience. You want to know that your plumbing company has helped others in the same situation as you so that they can use their experience to quickly resolve your issues.

It is important to go with a plumbing company that has a good reputation. You want to know that your plumber will have the skills needed to complete the job well. It is important to hire a company that cares about customer service and that will clean up after themselves. Find out beforehand what type of plumbing company you are going to be hiring by researching what their past customers have to say. Avoid companies with negative comments, and go with a company that has mostly favorable reviews.

When you are looking for a quality company, we can help. Give us a call today at 408-295-2182 to learn more about our services or to make an appointment.

The Advantages of Fabricating New Sheet Metal for Your HVAC System

Another few years have passed and now it’s time for you to perform maintenance on your HVAC system. It takes time and money, and then you have to do it all again in the next few years. You should instead consider replacing the material in your HVAC system with sheet metal. Though thin, sheet metal has proven to be strong, efficient, and cost-effective. Whether you are a facilitation manager for a large company or responsible for new construction projects, sheet metal is highly recommended for ventilation ducts.

Sheet metal can withstand large amounts of pressure along with the harsh weathers ranging from frigid to scorching. It is lighter than other material used for ventilation ducts. Regardless, it’s the custom fabrication of the sheet metal that is specifically tailored for your business. Sheet metal is cost- and time-effective because it’s simpler to make. The material isn’t imported from across the sea. Not only does it save money for HVAC contractors, but it saves on your company’s energy bills in the long run.

The Efficiency of Sheet Metal for Your HVAC System

There are a number of ways that sheet metal is economical for your company:

  • custom fabrication reduces air leaks
  • the relatively smaller size allows for better air volume and distribution
  • easier to manage

Sheet metal is always custom fabricated, and this is beneficial. Regular, generic-shaped air ducts are not as stable; they have a tendency to move and bend while in use. This causes air leaks. Air leaks mean that your ventilation would have to work even harder to get the air to its destination. It will stay on longer and increase your energy bill. Custom fabricated sheet metal is sealed tightly and cut to fit your building. It will not experience energy losses like normal air ducts.

Due to its smaller size and sealed design, sheet metal ducts allows air to flow through in smaller volumes. Therefore, the fresh air will make it to the designated rooms faster. These ducts simply have better control of the air volume. As a result, this is another way your HVAC systems won’t have to work as hard and saves your company money on the energy bill.

Maintenence should still be required every few years for your HVAC systems. However, sheet metal makes it easier for HVAC technicians to service. You also will not be required to have to replace it every few years. This is because custom fabricated sheet metal ducts are more durable, and is yet another money-saver.

If you’re ready to save money on your energy bill, then call us today at 408-295-2182 and inquire about sheet metal ducts for your building.