What Does It Mean if a Plumber Specializes in a Plumbing “Rough In”

A plumber that specializes in plumbing rough-in will be getting everything set up for the new bathroom or the remodel of the old one. Rough-in shows where plumbing pipes and appliances will be installed. This type of work is the groundwork for the project and shows the homeowner exactly where everything will be so that they can have a clear picture of their future bathroom. It can be helpful for the builders and everyone else involved to know exactly where pipes and appliances will be too. Rough-in plumbing is going to show how everything will be laid and connected.

Rough In Plumbers Can:
. Determine where appliances will be
. Cut drain holes and install pipes
. Connect drain lines to the sewer system

Rough In Plumbers Get Everything Started Properly

Rough-in plumbing is how your project starts. By working with a company that specializes in this type of plumbing, you can be sure that it will be done up to standard. Since this is the foundation of your new bathroom, you only want to trust this type of work to an experienced company that can make certain that everything is going to be laid out just right.

During the rough-in, your plumber will determine exactly where your appliances will need to be. They will mark spaces for your toilet, tub, and shower. This will help everyone be able to see how the bathroom will be set up. You can count on rough-in plumbers to have everything done right so that your bathroom project will turn out the way that you want it to.

Rough-in plumbers will also cut drain holes, install pipes, and connect drain lines to the sewer system. You can be certain that professional plumbers will know how to do all of this work properly so that your bathroom system will work the way that it should. Along with helping to set up your bathroom, rough in plumbing also works to make sure that everything connects properly.

If you are interested in rough in plumbing services, we can help. We specialize in rough-in plumbing and will work hard to give you premium results. Give us a call today at 408-295-2182 to learn more or to set up an appointment.

Why Do Many Contractors Use Industrial Process Piping?

In traditional plumbing systems, copper pipes are used as apparatuses that transport water from one destination to another for plumbing, heating, cooling, and sanitation purposes. The primary difference when comparing industrial process piping to traditional plumbing systems, is that process piping units serve a direct purpose. Instead of just transferring liquid or gas components from one area to the next, industrial process piping typically converts these components into a different product.

A prime example of when contractors opt for industrial process piping is when they are constructing the mixing systems found in commercial factories that manufacture soft drinks. When the ingredients are being mixed and transported from one destination to the next, the pipes themselves are actually serving a purpose by combining the ingredients together. This purpose that goes beyond transportation of the materials alone is what causes it to be industrial process piping.

What Are Some Other Differences in Process Piping?

Aside from the dissimilarities in the actual transmission process, there are three other factors that differentiate process piping from traditional plumbing:

  • the industries in which they are found
  • coding and regulations
  • backflow prevention
  • the presence of water

First and foremost, contractors mainly choose to install industrial process piping when they are tending to commercial buildings as opposed to residential units. Since their structure and locations vary immensely from traditional plumbing systems, their coding and regulations are also very different. With residential plumbing, regulations are much more strict when it comes to which materials the piping itself can be made out of. When it comes to industrial process piping, the restrictions are much more lenient in which materials can be used.

Industrial process piping systems also usually come with a backflow prevention fixture built into the piping itself. This is essential since many materials that are transported throughout these systems are much more dense than water. Although water can be used as a coolant within these setups, it is rarely the only liquid that is being transferred throughout the apparatuses.

Having an experienced team of contractors to install your industrial process piping system is imperative when it comes to ensuring that all codes and regulations are followed. Hiring a professional will not only provide your company with an efficient system, but they will also make sure that it passes any future inspections. Get in touch with our team at 408-295-2182 for more information on how our knowledge and expertise in industrial process piping can benefit your business.

How Custom Sheet Metal Is Used to Make Air Ducts

How Custom Sheet Metal Is Used to Make Air Ducts

Creating custom ductwork out of sheet metal is a process that can either be done primarily with hydraulic machinery, or through a handmade process that requires minimal help from heavy equipment. Proper ducting is a key part in an HVAC system that runs safely and efficiently, which is why hiring professionals with expertise in custom metal fabrication is a key component in developing an effective HVAC structure. Although the handmade process requires more patience and effort, both methods have the ability to produce ideal results.

Custom sheet metal ductwork that is done primarily by hand still requires a good amount of materials and tools. For clean cuts, minimal deformation, and optimal bending, laborers will need:

  • swing beam shears
  • galvanized sheet metal
  • a professional plate roller

Prior to the sheet metal being fed into the roller, the swing beam sheers are used to cut each section into the custom lengths necessary for creating the pockets and extensions for each duct. Each corner should be notched by a notching tool in order to form a click-and-lock system that will allow the straight trunk ductwork to lock into place later on.

After the Plate Roller or Hydraulic Press Brake Is Utilized

Whether the galvanized sheet metal is fed into a plate roller during the handmade process, or fed into a hydraulic press brake at a metal fabrication facility, it will need to be fastened together on a fabrication bench. The lock joint should then be finished at a 90 degree angle. Laborers can slightly bend the sheet with a wide manual break beforehand if they feel that it is necessary.

Installing a duct system that meets the custom specifications of each HVAC setup should be a primary concern for any commercial or residential consumer. When the ductwork in a building’s HVAC system is subpar, energy costs immediately reflect the lack of efficiency present within the structure itself. Recruiting professionals who have extensive knowledge in custom sheet metal ductwork will provide you with an HVAC setup that is both cost-effective and energy efficient. See how our HVAC experts can help you install a custom ductwork system at 408-295-2182

What Concerns Should You Have About Plumbing When Buying a New Home?

When you are going through the home buying process, it is important to check out the plumbing of any home you are considering buying. Even small problems can turn into major ones if the issues are not resolved in a timely manner, so you want to know what you are going to be dealing with upfront. If you find serious problems, you may also be able to get a reduction on the price of the house or have the homeowner fix the problem before you purchase it. If nothing else, you will know what you are getting into before you decide to make the purchase.

Check Out:
. Toilets
. Sinks
. The septic system
. Any water stains

Be On the Lookout for Plumbing Issues

When you check out a new house, go straight for the toilets. Make sure that they flush properly and are not leaking at the bottom. A leaky toilet can cause serious water damage, so it should be fixed as soon as possible. You should also listen to hear the sound of continuously running water. If you do, you may need a new flapper or chain for your toilet.

You can also have a look at the sinks throughout your potential home. Check out the kitchen and bathroom to make sure that all faucets work well. You should also make sure that there are no leaks. Even a small leak can end up running up your water bill.

The septic system of a potential home should be in good working order. If you notice any unpleasant smells or a lot of water, you may want to have a professional look at the situation. Septic problems can be serious concerns, so be sure that you check it out before you commit to buying a property.

You should also look for water stains in the floors, walls, and ceilings that could be proof that there is a burst pipe or water leak in the property. It is always a good idea to find out these problems before you make an investment in buying a new home.

If you are interested in having your potential home inspected or need help after you have discovered plumbing issues yourself, we can help. Give us a call today at (408) 295-2182 to get started.

Who Should You Call About HVAC Repair?

The only company you call for HVAC repair should be reputable and professional. It is important to find the perfect choice for your needs instead of just hiring anyone. By doing some research, you can make the right choice for your heating and cooling requirements.

Hire a Company With:
. The right qualifications
. A good reputation
. Quality Products
. Great customer service

Find a Company You Can Trust

When it comes to your heating and cooling system, you want to make certain that only a professional will take care of your unit. Make sure that you find a licensed, certified, and insured company that can handle your HVAC needs. It is important to work with a business that you feel like you can depend on for minor or major HVAC issues.

The company that you call for your HVAC needs should also have a good reputation. You can find out if a company has a good reputation by asking your friends and family members if they have heard positive things about the company. You can also look up online reviews to see if a company has helped others in the same situation as you before. If a company has many satisfied clients, you can feel good about hiring them when you need the services they offer. Look for signs that they arrive on time, clean up after themselves, work in a timely manner, and anything that might make you want to hire them.

A good company should also use reliable products. You want to know that your HVAC company uses only the best heating and cooling units. If yours breaks, you want to know that they use only the best parts and materials to fix it. By hiring a company that works with well-known brands and trusted products, you can have peace of mind.

Finally, you should also hire a company that offers great customer service. You can tell if a company cares about its customers by the way that it responds to them. If you call to make an appointment, you should be greeted by a polite and helpful professional. You should also be able to have an appointment made for you quickly. When a professional comes to your home, he or she should always be courteous as well. If you are ready to schedule an appointment with a reliable company, give us a call today at (408) 295-2182.

When Do Los Gatos Residents Need their AC Repaired?

There are many signs that can let you know that it is time to get your AC repaired if you live in the Los Gatos area. It is important to pay attention to warning signs so that you can get your HVAC unit fixed as soon as possible. Even minor issues can turn into emergencies if the problems are not fixed fast enough. It is important that you get help as soon as you notice any problems with your unit.

Be On the Lookout For:
. Unit not putting off enough cool air
. Bad smells
. Higher utility bills than normal
. Loud noises

Watch Out for AC Issues

Although you know to call if your AC unit is not working at all, you should also get assistance if you notice that your unit is not putting off enough cool air. You want to make certain that your unit is in good shape and able to cool off your property optimally. When your unit is not putting off enough cool air or if it is blowing out hot air, go ahead and call a professional to come to look at it.

Bad smells coming from your HVAC unit can be another sign that your unit will need to be repaired soon. You could be smelling burnt wires or even mold that is forming in your unit. Have your AC unit looked at quickly whenever you start to smell bad odors?

If you notice that your utility bill is higher than it normally is, it could be because of your AC unit. If there is even a small problem with your unit, it will have to work harder to produce enough cool air. This can lead to higher bills and cause additional wear and tear to your unit.

Loud noises are another sign to be on the lookout for. Loud banging noises or screeching sounds can let you know that your AC unit has a problem. Go ahead and call a professional if you hear strange noises coming from your unit.

If you notice any signs that you may have a problem with your AC unit, we can help. Go ahead and give us a call at (408) 295-2182 if you have any questions or need to set up an appointment.