Posts

What Is Involved In Converting Your Facility Over To Solar?

Converting your facility to solar power is a cost effective way to power your business. There are several steps to convert your facility’s electricity over to solar.

Determine the Best Option

You have the option to either lease or buy the solar panels. In a lease, you will pay fixed amount each month for the solar produced energy. The lease agreement normally ranges from 7 to 18 years and during that period of time, you will be paying just for leasing the panels. The leasing fee will increase by a percentage every year.

In a purchase agreement, you will pay only for the amount of solar energy that you want. The agreement typically lasts for 10 to 20 years and the upfront cost is low.

Contact a Solar Company

Many solar companies exist so it is best for you to choose among the ones that have a good record of installing solar powers successfully. The solar power company will send a representative to inspect your facility. The representative will also need specifics about how much energy the facility needs and how the energy will be used. The company then sends an audit team or audit person over to figure out how to best connect the solar panels.

Design Phase For Solar

The engineers will try to form a plan on how the solar power installation should be designed. The audit team and the design team will work closely together for awhile to plan how to proceed. A project manager will be assigned to deal with permits, utilities, applications and paperwork. Once the design phase is completed, the project team will try to get approval from the utilities to start installing the solar panels.

After Approval

When everything is approved, the construction can start. The construction process typically takes from 6 months to a year. Some parts of the construction phase will take longer than others. Powering a facility with solar power can be a long process and it should not be expected to take a few days to a few weeks to complete the construction.

If you are ready to get the process started to power your facility with solar power, call O.C. McDonald today 408-295-2182

What To Look For In a New Construction Contractor

It’s a beautiful day and as you settle into your morning routine at the office, sipping on your second cup of java your office line rings. A pipe has burst in the lobby restroom and water is everywhere. The company’s largest client is coming by for a lunch presentation and time is of the essence. If you’re prepared, you’ll have your construction contractor on speed dial. If not, you’re going to have to move quickly to find a reliable and reputable firm that can handle the situation stat. Don’t put yourself or your business in that situation.

Identifying a new construction contractor doesn’t need to be daunting. Hopefully, you’ve not waited for a plumbing or HVAC crisis to look for a new construction company to work with. If you’re a large corporation or small to medium sized business, the same evaluation strategy applies.

Key Qualities to Look for in a New Construction Contractor

Company history. The length of time a company has been in business says a lot. There are construction contractors that come and go. Look for a business that has a solid history. Factor in how many years they’ve been in business and if they’re family owned, even better. A construction contracting company that has generations of experts behind it is a find.
Reputation. If the company has been in business for years, they must be doing something right. Take a look at their reputation. What are customers saying about their work? Do they get the job done in a professional manner? Are they dependable? If they’re keeping their clients happy and expanding their business, give them another positive check on your evaluation list.
Expertise. Your construction contractor should be well-versed in the basic mechanics of everything from piping, gas fittings, new and old construction, to HVAC and more. They should be able to handle it all. You want to use an expert firm. One that keeps up with proper licensing and training for all crew members and leads their industry when it comes to cutting edge technology.
Safety. Safety first should go without saying, but this needs to be taken into consideration. You want a new construction contractor that put this as a top responsibility.

Ready you ready to make your move? We can help, call us today at (408) 295-2182

What Is a Design Build Contractor?

Do you have a building project? If yes, you should consider hiring a design-build contractor. In design-build, rather than the owner contracting with two separate individuals or teams, that is contractor and architect, he or she ties the architect contractually to the contractor. The owner then deals with one entity, that is, the Design-Build team.

How Does a General Contractor Differ from the Design-Build Contractor?

A general contractor is concerned with just the construction aspect of the project where they subcontract some of the work; another firm completes actual designs and plans for the project. As a result, the project may take time, and the process may not be continuous since the designing is done by someone who is outside the project but a design-build contractor does all the work including construction and designing of the project.

How Can You Benefit by Hiring a Design-Build Contractor?

  • Single source of accountability

The architect and builders are under one roof allowing you to work with one team throughout the project which as a result improves accountability.

  • Saves time

A design-build contractor will save you time during development and construction of your building since there will be no delays in communication between the architects and builders for they work as one team. Arising changes or problems are communicated quickly and effectively which apparently helps the design team finish the work on time.

  • Saves money

When drawing plans, the designer takes cost efficiency enabling you to save costs on construction. Hiring another team to do the construction work is expensive, but with build design, you can save these additional fees thereby lowering the project costs. Some design-build teams offer discounts if you use their full services making you save more.

  • Quality control

Use of design-build contractor removes the ambiguity that is likely to be seen in material and construction specifications. The designer, engineers, and builders are from the same team which makes them focus on protecting the client’s interest.

  • Budget management

To keep the project with a reasonable budget, you should discuss the budget during the design phase. Discussing the cost ensures that the owner is aware of the whole costs and plays a crucial role in arriving at the price of the entire project. The design-build contractor defines and controls the project costs once the scope of the work has been finalized.

If you combine design-build experience in one team, you will realize the benefits of “one-stop shopping” such as cost saving, saves money and budget management among other benefits. Do you have a project you want completed? Call us today at (408) 295-2182

Experience and Safety Matters When Opting For New Design Build Mechanical and Plumbing in San Jose

When it comes to new design build for plumbing and mechanical projects in San Jose, there’s no replacement for experience and safety. Unless you have a contractor with the knowledge of how to handle the design build of mechanical and plumbing systems based on having done it many times before, you can end up with many problems, including injuries to people using the facility. That’s why when you are trying to decide on a contractor to do that type of work, two of the most important questions you should ask are how much experience they have doing that type of work and what type of safety record they have on their projects.

 

Why Experience Matters

New plumbing and mechanical design builds can be very complex. There are a number of challenges that can arise that are not covered in schools and training classes. So while it is important the contractor has the proper training and licenses to do the job, that’s not enough. You need to choose a company that has encountered the many problems that can pop up and found effective ways to deal with them. Classroom trained contractors know a lot of theory. But experience with the practical application of that information is the only way to be sure they will know how to do the job right.

 

Safety First

The safety of the workers and the people using the mechanical and plumbing new builds has to be the contractor’s number one priority. Many companies boast about how fast they can get the job done and how good it will look. But if contractors involved in the new design build don’t have a track record for doing the job safely and having the completed project work well without the people using it getting injured, then they are not the right choice for the project. One accident with a mechanical or plumbing new build can leave the project owner with a major problem. One that can cost them lots of money and ruin their reputation.

 

The Right Choice

For people looking for contractors to handle new design mechanical and plumbing builds, making the right choice is crucial. People’s health and safety are at stake and they’ll be held responsible and liable for any mistakes made by the contractor they hire. Therefore it’s vital to verify they have adequate experience and a track record for safety before you hire them.

Call O.C. McDonald today (408) 295-2182

Design Build for Medical and Educational HVAC in Silicon Valley That Saves Energy Dollars

Benefits of Constructing Energy Saving Buildings

Constructing an energy saving building saves a lot of money. This is seen when the building is constructed. It enables the saving of most of the expenses that other buildings incur. The buildings constructed in an energy saving manner save space. It is created in a way that most people can use one resource to meet their needs. The most popular building that is built in an energy saving mode is the medical and educational HVAC in Silicon Valley. This building is an incubator of different experts to develop solutions that are viable in the society. The construction of the building in an energy saving way is beneficial in various ways. Below is a list of the advantages of constructing an energy saving building.

Merits of constructing energy saving building

  1. The building is efficient

The building at Silicon Valley is efficient because it is an incubator. The building is constructed in an energy saving manner that enables the developer to access different resources that are inaccessible in other buildings. The building becomes efficient when there is a shortage of resources. The building is sufficient in its nature when there is a shortage of electricity.

  1. It facilitates team work

The idea of sharing resources enables teamwork amongst people who are on the team. People working together on a similar project can easily work together because even their environment promotes teamwork. People are able to learn from each team member. A team member can help to solve a problem that others cannot. The others get an opportunity to learn.

  1. It facilitates cheap research

The building is a research center as mentioned above. Research is expensive when the resources used are costly. The energy saving building facilitates the research to become cheap as well. More people can test their ideas cheaply and give credible resources.

  1. The building facilitates innovativeness

The building is fit to be used for other uses besides facilitating research. These uses facilitate the achievement of other different goals. The building can be used for the testing of different ideas. This can also involve those that are not research based.

It is important to note and conclude that an energy saving building is one that decreases the cost of production for products. It makes it easy for innovation. It also enables innovators to work as a team and use similar resources to develop useful products in the society.

Important Things to Know About Industrial Green HVAC Systems

Homeowners are increasingly looking for means to maximize the efficiency of devices and equipment in their homes in an attempt to reduce the adverse environmental impact and also reduce the operational costs. The HVAC industry is slowly responding to the increasing demands for green products with an emphasis on producing high-efficiency HVAC systems that are not only environmentally friendly but also save on energy bills while keeping homes warm and with clean air.

The Environmental Protection agency enacted a regulation in 2010 that requires all the heating and cooling equipment manufactured to use R-410a refrigerant. Unlike other refrigerants, R-410a does not contribute to the depletion of ozone layer. The older units that operate on Freon or R-22 will still be serviced, and the Freon refrigerant will be manufactured until 2020.

However, the cost of Freon is projected to rise in the next ten years, which is a way of discouraging companies from using the refrigerant in the heating and cooling units. Unlike Freon, the R410a refrigerant does not negatively impact the environment, and it helps to cut power consumption by the HVAC systems. Here are top three things you need to know about Green HVAC systems.

They can reduce power costs up to 40%

There has been an increase in energy costs over the recent few years and homeowners and industries have been on the lookout for alternative ways that will cut their running costs. With the green HVAC system, homeowners and manufacturers can reduce the power bill by up to 40 percent. It has been a relief to companies that have been paying massive amounts for electricity bills.

They clean the air better than the traditional units

Green HVAC systems have been shown to reduce air, acoustical, and thermal pollution. Most of these units are made using the latest technology so they can filter the air better than the traditional units. That creates a better environment to live in especially for individuals suffering from allergies. They can get rid of pollen and other suspended matter that can trigger allergic reactions.

They are quieter than traditional units

One of the nerves wrecking things about the traditional HVAC systems is the amount of noise they produce when they are operating. The noise increases when dirt accumulates on the filters. On the other hand, industrial green HVAC units produce less noise and also consume less energy. They are increasingly being used in hospitals to condition the air since they do not disturb patients.

Call O.C. McDonald today for a free consultation

(408) 295-2182